Skip to Content

Welcome to ChillSense

This guide will help you set up your sensors, monitor your fridges, freezers, and cool rooms, and act on alerts before food safety or stock is at risk.

Start setting up Tour the dashboard

What ChillSense does for you

Continuous cold-chain monitoring, designed for busy hospitality, food manufacturing, and aged-care teams.

Continuous monitoring

Temperature and humidity on every cold-chain asset, 24x7, with full history for the audit questions auditors actually ask.

Live dashboard

Site, area, and asset-level views so any staff member can spot trouble in seconds.

Configurable alerts

Threshold, offline, and battery alerts to the right people, by email or SMS, without noise.

HACCP-style reports

PDF reports you can share with auditors and food safety officers, on demand or on a schedule.

Historical trends

Spot drift, energy waste, and slow failures before they become an incident or a stock loss.

Audit-ready records

Tamper-evident logs, corrective-action notes, and clear evidence trails that hold up under inspection.

How ChillSense fits together

Three simple pieces: sensors, hubs, and the dashboard. No software to install.

ChillSense sensor inside a commercial fridge — replace via Odoo editor

1. Sensors

Placed inside or near your cold assets to capture temperature and humidity.

ChillSense hub on a kitchen wall — replace via Odoo editor

2. Hubs

Collect readings from nearby sensors and send them securely to ChillSense.

ChillSense dashboard on a laptop — replace via Odoo editor

3. Web dashboard

Live views, alert configuration, and HACCP reports — in any modern browser.

You do not need to install any software. Sensors and hubs are pre-configured for your account, and the dashboard runs in your web browser.

Recommended reading order

If you are setting up ChillSense for the first time, work through these in order:

  1. Setting up ChillSense - get your hubs, sensors, and account ready.
  2. Placing sensors - guidance on where and how to position sensors.
  3. Using the dashboard - find your way around the dashboard.
  4. Alerts and notifications - configure who gets told and when.
  5. HACCP reports - generate compliance-friendly reports.

If something is not working, jump straight to:

Ready to set up your first site?

The next guide walks through hub deployment, sensor pairing, and naming - the basics that make every other workflow easier.

Open the setup guide Talk to support